TO:kuen656
我这次单独开启SERVER-2 就正常了
不过设定到最后
又出现
When Internet Connection Sharing is enable, your LAN adapter will be set to use IP
address 192.168.0.1 . Your computer may lose connectivity with other computers on
your network. If these other computers have static IP addresses, you should set them
to obtain their IP addresses automatically. Are you sure you want to enable Internet
Connection Sharing?

TO:fz500s
跑起来还算正常啊
就算慢也慢一点点而已
并不会像鸟龟在跑
我可是花了不少抠抠加记忆体到2GB 的呢
当初就是1GB 跑起来太慢
现在可就顺多了

哇咧
选择确定后又出现
Internet Connection Sharing (ICS) and Internet Connection Firewall (ICF) cannot be
enable because Routing and Remote Access has been enabled on this computer. To
enable ICS or ICF, first disable Routing and Remote Access.
怎么会这样啊?
两者是相冲突吗?

先不要管 ICS , 以 Route 功能来看应该只要设 Route and Remote Access Service 就可以。

终于成功了

恭喜 !
在之前提过依据教材修Vmware Vnet8 网段值，DNS & Default Gateway仍维持旧数值你可以修改
C:\\Document and Setting\All Users\Application Data\Vmware\vmnetdhcp.conf 档案中 "Option domain-name-servers" & "option routes" 所订之值然后上下Vmware Services 即可。

若要练习 Cluster 请改用 Vmware GSX Server.

# Configuration file for VMware port of ISC 2.0 release running on
# Windows.
#
# This file is generated by the VMware installation procedure; it
# is edited each time you add or delete a VMware host-only network
# adapter.
#
# We set domain-name-servers to make some clients happy
# (dhclient as configued in SuSE, TurboLinux, etc.).
# We also supply a domain name to make pump (Red Hat 6.x) happy.
#
allow unknown-clients;
default-lease-time 1800;           # default is 30 minutes
max-lease-time 7200;             # default is 2 hours

# Virtual ethernet segment 1
# Added at 02/11/05 21:32:02
subnet 192.168.9.0 netmask 255.255.255.0 {
range 192.168.9.128 192.168.9.254;         # default allows up to 125 VM's
option broadcast-address 192.168.9.255;
option domain-name-servers 192.168.9.1;
option domain-name "localdomain";
default-lease-time 1800;
max-lease-time 7200;
}
host VMnet1 {
  hardware ethernet 00:50:56:C0:00:01;
  fixed-address 192.168.9.1;
  option domain-name-servers 0.0.0.0;
  option domain-name "";
}
# End

# Virtual ethernet segment 8
# Added at 02/11/05 21:32:02
subnet 192.168.10.0 netmask 255.255.255.0 {
range 192.168.10.128 192.168.10.254;         # default allows up to 125 VM's
option broadcast-address 192.168.10.255;
option domain-name-servers 192.168.10.2;
option domain-name "localdomain";
option netbios-name-servers 192.168.10.2;
option routers 192.168.10.2;
default-lease-time 1800;
max-lease-time 7200;
}
host VMnet8 {
  hardware ethernet 00:50:56:C0:00:08;
  fixed-address 192.168.10.1;
  option domain-name-servers 0.0.0.0;   <==是这里吗?
  option domain-name "";               <==            
  option routers 0.0.0.0;               <==
}
# End

那我192.168.10.X 的IP
都可以改成192.168.1.X 吗?

# Virtual ethernet segment 8
# Added at 02/11/05 21:32:02
subnet 192.168.10.0 netmask 255.255.255.0 {
range 192.168.10.128 192.168.10.254;       # default allows up to 125 VM's
option broadcast-address 192.168.10.255;
option domain-name-servers 192.168.10.2; <----------- Here
option domain-name "localdomain";
option netbios-name-servers 192.168.10.2;   <-------- Here
option routers 192.168.10.2;         <------------- Here
default-lease-time 1800;
max-lease-time 7200;
}

这几个Option 值在Vmware 提供之介面不会更改! 我已经作过 Lab. 不过这几个值在 Guest 设为 DHCP 时有用，若Vnet0 (Host-Only) 所有Client 要设为DHCP Client则同理修改 Vnet0 部分。

有问题喔
要是client改成自动取得IP
DNS server 会变成192.168.9.1
也没办法连网际网路开网页看
此外
我发现
server-1 的两个连线可以disable
但是server2的却不行
而且 nslookup 结果如下
DNS request timed out.
  timeout was 2 seconds.
*** Can't find server name for address 192.168.1.128: Timed out
DNS request timed out.
  timeout was 2 seconds.
*** Can't find server name for address 192.168.1.129: Timed out
DNS request timed out.
  timeout was 2 seconds.
*** Can't find server name for address 192.168.9.1: Timed out
Default Server: dns.hinet.net
Address: 168.95.1.1

这样看来
是不是server-2 等于没用?
反而去用外部DNS ?
因为我建server-2的目的就是server-1 挂掉
还有个server-2 可以备用啊

1. 基本上你所要建置系统架构是经由 Server-2 出Internet，因而 Option domain-name server 及 Option route-server 应该指向 Server-2 IP(192.168.9.x )
2. 是否在DNS 上建立Reverse Lookup Zone 相关资料 (PTR, Name Server )?