TO:kuen656
我這次單獨開啟SERVER-2 就正常了
不過設定到最後
又出現
When Internet Connection Sharing is enable, your LAN adapter will be set to use IP
address 192.168.0.1 . Your computer may lose connectivity with other computers on
your network. If these other computers have static IP addresses, you should set them
to obtain their IP addresses automatically. Are you sure you want to enable Internet
Connection Sharing?

TO:fz500s
跑起來還算正常啊
就算慢也慢一點點而已
並不會像鳥龜在跑
我可是花了不少摳摳加記憶體到2GB 的呢
當初就是1GB 跑起來太慢
現在可就順多了

哇咧
選擇確定後又出現
Internet Connection Sharing (ICS) and Internet Connection Firewall (ICF) cannot be
enable because Routing and Remote Access has been enabled on this computer. To
enable ICS or ICF, first disable Routing and Remote Access.
怎麼會這樣啊?
兩者是相衝突嗎?

先不要管 ICS , 以 Route 功能來看應該只要設 Route and Remote Access Service 就可以。

終於成功了

恭喜 !
在之前提過依據教材修Vmware Vnet8 網段值，DNS & Default Gateway仍維持舊數值你可以修改
C:\\Document and Setting\All Users\Application Data\Vmware\vmnetdhcp.conf 檔案中 "Option domain-name-servers" & "option routes" 所訂之值然後上下Vmware Services 即可。

若要練習 Cluster 請改用 Vmware GSX Server.

# Configuration file for VMware port of ISC 2.0 release running on
# Windows.
#
# This file is generated by the VMware installation procedure; it
# is edited each time you add or delete a VMware host-only network
# adapter.
#
# We set domain-name-servers to make some clients happy
# (dhclient as configued in SuSE, TurboLinux, etc.).
# We also supply a domain name to make pump (Red Hat 6.x) happy.
#
allow unknown-clients;
default-lease-time 1800;           # default is 30 minutes
max-lease-time 7200;             # default is 2 hours

# Virtual ethernet segment 1
# Added at 02/11/05 21:32:02
subnet 192.168.9.0 netmask 255.255.255.0 {
range 192.168.9.128 192.168.9.254;         # default allows up to 125 VM's
option broadcast-address 192.168.9.255;
option domain-name-servers 192.168.9.1;
option domain-name "localdomain";
default-lease-time 1800;
max-lease-time 7200;
}
host VMnet1 {
  hardware ethernet 00:50:56:C0:00:01;
  fixed-address 192.168.9.1;
  option domain-name-servers 0.0.0.0;
  option domain-name "";
}
# End

# Virtual ethernet segment 8
# Added at 02/11/05 21:32:02
subnet 192.168.10.0 netmask 255.255.255.0 {
range 192.168.10.128 192.168.10.254;         # default allows up to 125 VM's
option broadcast-address 192.168.10.255;
option domain-name-servers 192.168.10.2;
option domain-name "localdomain";
option netbios-name-servers 192.168.10.2;
option routers 192.168.10.2;
default-lease-time 1800;
max-lease-time 7200;
}
host VMnet8 {
  hardware ethernet 00:50:56:C0:00:08;
  fixed-address 192.168.10.1;
  option domain-name-servers 0.0.0.0;   <==是這裡嗎?
  option domain-name "";               <==            
  option routers 0.0.0.0;               <==
}
# End

那我192.168.10.X 的IP
都可以改成192.168.1.X 嗎?

# Virtual ethernet segment 8
# Added at 02/11/05 21:32:02
subnet 192.168.10.0 netmask 255.255.255.0 {
range 192.168.10.128 192.168.10.254;       # default allows up to 125 VM's
option broadcast-address 192.168.10.255;
option domain-name-servers 192.168.10.2; <----------- Here
option domain-name "localdomain";
option netbios-name-servers 192.168.10.2;   <-------- Here
option routers 192.168.10.2;         <------------- Here
default-lease-time 1800;
max-lease-time 7200;
}

這幾個Option 值在Vmware 提供之介面不會更改! 我已經作過 Lab. 不過這幾個值在 Guest 設為 DHCP 時有用，若Vnet0 (Host-Only) 所有Client 要設為DHCP Client則同理修改 Vnet0 部分。

有問題喔
要是client改成自動取得IP
DNS server 會變成192.168.9.1
也沒辦法連網際網路開網頁看
此外
我發現
server-1 的兩個連線可以disable
但是server2的卻不行
而且 nslookup 結果如下
DNS request timed out.
  timeout was 2 seconds.
*** Can't find server name for address 192.168.1.128: Timed out
DNS request timed out.
  timeout was 2 seconds.
*** Can't find server name for address 192.168.1.129: Timed out
DNS request timed out.
  timeout was 2 seconds.
*** Can't find server name for address 192.168.9.1: Timed out
Default Server: dns.hinet.net
Address: 168.95.1.1

這樣看來
是不是server-2 等於沒用?
反而去用外部DNS ?
因為我建server-2的目的就是server-1 掛掉
還有個server-2 可以備用啊

1. 基本上你所要建置系統架構是經由 Server-2 出Internet，因而 Option domain-name server 及 Option route-server 應該指向 Server-2 IP(192.168.9.x )
2. 是否在DNS 上建立Reverse Lookup Zone 相關資料 (PTR, Name Server )?